Yes, single rods are available but under the following circumstances. Since all sets of ZRP rods are weight- matched you will need to inform us with the exact weight of the rod as well as the batch number which you will find on the lipped cap relief. The price for a single rod is not the price of the set divided by the number of rods. For more information about the pricing please contact us or the dealer in your country.
First of all, on ZRP Products have a laser marked logo and not stamped. On the rods you will find the logo on the side of the beam and on the crankshafts, you will find it on the face of the first counterweight. All bolts on the rods have the ARP logo and the material of the bolt, for example ARP2000, L19 or ARP8740.
After you can refer to the installation instructions that are in the box, if you have lost the instructions please inform us with the measurements of the bolts (under head length, head size and thread size) and we will send you the installation instructions again or click here for the installation link. We use “shelf numbered” ARP bolts on ZRP rods.
There are undisputable advantages from using this setup Especially for Endurance built engines, but Acceleration engines can also benefit, nonetheless.
Some of them are:
All the parts are sold for racing purposes and may be installed on vehicles (cars, motorcycles, boats, etc.) used solely in sanctioned off-highway events. The installation of these parts may cause the vehicles to be unable to be lawfully used on public highways, and the purchaser assumes all risk and expenses thereof. Also, we are not responsible for any damage caused by misapplication or catalog typographical errors.